Andy™

small claims court for payment since work has not been complete and your report may magically appear... or then get someone else in to...

stopped watching it a few years ago. doesn't look like im missing anything

surely a socket on each end and a short length of flex with 2x plugs would have been easier?

its unusual to have all 3 open circuit. single fault would only affect one of them. 3 individual faults, one on each its not so common...

press for soap, press and hold to isolate, press and hold whilst flicking light switch on & off 5 times to switch it back on?

welcome to our world where the regs constantly change, often making no sense other to make someone else more money, and many times...

chances are the heaters are 2kw (or less) panel heaters. so under 10a. so nothing to code. RCD codes are correct. good luckwith RCBO's...

pre amd2... work to 18th original & amd1 are now failures

normal-ish. you'll always get a spark when making / breaking a load like that but its not usually that visible. if you get any burning /...

if it goes into the ground then its almost always extraneous. so much so that it can be used as an earth electrode

i did suggest that and they may do so but that's not my decidion

told them that its a C3 at worst. they want a quote to change to type A though. its a school and they've now got a report saying its...

looked at a job yesterday - EICR by another company has C2 for type AC RCBO's and require type A. installation is probably 4-5 year old

split units are better just not always the most practical. single unit is better as a DIY job. depending on layout & where its going...

definitely, however at least with this one there is no messing around with pipework / F gases since its a complete unit